Genimod®-en

  1. G Device compartment
  2. K Cable terminal compartment
  3. S Bus-bar compartment
  4. Q Cross-wiring compartment
  1. G Device compartment
  2. K Cable terminal compartment
  3. S Bus-bar compartment
  4. Q Cross-wiring compartment

Advantages

  • Maximum safety and quality on account of type tests
  • Extremely wide range of requirements in terms of technology, ease of use, safety and availability is met
  • Maximum personal and system protection
  • Easy and safe conversion and retrofitting
  • Compact design
  • Easy-to-assemble design
  • Short delivery time
  • Comprehensive utilities for planning and design
  • Quality management to DIN EN ISO 9001
Standards, regulations
Standards, regulations Type-tested low-voltage-switchgear-assemblies IEC 61439, VDE 0660 Part 600
Protection against electric shock EN 50274, VDE 0660 Part 514
Test of internal fault behaviour IEC 61641, VDE 0660 Part 500 supplementary sheet 2
creepage and clearance distances
creepage and clearance distances Rated impulse withstand voltage 8kV
Overvoltage category III
Degree of contamination 3
Design values
Design values Rated isolation voltage 1000V
Rated operational voltage 690V
Busbar
Rated current bis 4000A
Rated peak withstand current bis 220kA
Rated short time withstand current bis 100kA, 1s
Distributor busbar
Rated current bis 1600A
Rated peak withstand current bis 143kA
Rated short time withstand current bis 65kA, 1s
Devices
Circuit breaker bis 6300A
Cable outlets bis 800A
Motor outputs bis 500A
Internal division
Internal division nach IEC 61439-1/2 Form 1 bis Form 4
Degree of protection
Degree of protection nach DIN 60529 IP 20 bis IP41
Oberflächenbehandlung
Surface treatment inside Aluminium-Zinc-coated or electrogalvanized
outside powder-coated RAL 7035
Dimensions
Dimensions nach DIN 41488 Height 2200mm
Width 400, 600, 800, 1000, 1200mm
Depth 400, 600, 800, 1000, 1200mm
further Dimensions on request

You want more information? Order our current booklet now!
To the Form.